Vector Navtex System

VR1500TT and VR3000-TT - 1.5 kW and 3 kW Navtex / MF Telegraph Transmitters

Constant field strength output for higher system availability
Automatic resistance matching in the Antenna Tuning Unit (ATU)
Remote control and monitor of the ATU to limit worker exposure to strong RF fields
Sophisticated graphical user interface (GUI) at Vector Navtex Transmitter for easy maintenance and troubleshooting
Extensive automatic fault monitoring for faster troubleshooting available locally or remotely
Extensive remote command and control capabilities for fewer site visits

Highly Stable Generation of RF and FSK using Direct Digital Synthesizer (DDS)
Switch Mode Power Supplies (SMPS) eliminate need for user configuration over full ac input range of 170 – 270 V ac
Vector Enhanced Remote Control/Monitor allows the user access to the vast array of control, status and alarms available from the Vector system including the ability to control/monitor the Antenna Tuning Unit
Built in Diagnostics allows the user to easily identify fault to Lowest Repairable Unit locally or remotely
Local or Remote Diagnostic test without need for dummy load
RS232, RS422, Modem, Optically Isolated Inputs and Form C Contact Outputs available for Remote/Control Monitor
Commonality of Parts and Assemblies with Vector DGPS and NDB platforms
A Local PC is not required to install, configure, diagnose or maintain the Vector Navtex system

Dual Channel
Automatic Servo Controlled Resistive Matching and Reactive Tuning
Servo Inhibit to prevent tuning from unwanted signals
Vector 1500TT/3000TT ON/OFF Control available at ATU
Remote control and monitor of the ATU limits worker exposure to strong RF fields
An optional external resistor bank for the ATU adds additional resistance in series with the antenna, optimizing the trade-off between antenna bandwidth and efficiency

undefined